8/8/2023 0 Comments Power magic pro![]() ![]() The DC connectors from past models will actually connect to the X Series input ports in appearance but won’t provide power.Īlso, if you are wondering, the X Series male DC connectors are not compatible with the previous dashcam models, including DR750-2CH LTE, which was the last model featuring that connection type. It bears repeating that due to the different design of the new 3-wire power cables, the past models’ (DR900S, DR750S, DR650S) power cables are not compatible with the new X Series dashcams. Compatibility with past models’ power cables As long as the switch is off, it will still power your dashcam as you drive but not when the ignition is off. ![]() Then when you come back to your home garage, you can switch it off. For example, if you commute and want to use Parking Mode at your office’s parking lot, you can switch it on. Connect the red ACC (+) wire to a Switched fuse. Refer to the Cut-off Voltage Settings below and set the switches according to your requirements. That ON/OFF switch can be handy as it toggles Parking Mode ON/OFF (not the power). Chris Updated : Octo22:32 Created : Octo23:35 Installation Tutorial: Set the voltage and timer switches. Power Magic Pro powers your BlackVue in Parking Mode using your vehicle’s battery.Īnother reason one would want to keep using a Power Magic Pro is the Parking Mode switch. In other words, even if you don’t hardwire your BlackVue to your vehicle’s fuse panel, it retains the ability to switch to Parking Mode when it detects that the vehicle is stationary for five minutes. The 2848×1312 resolution further enhances the sharpness of images and video. It has a 19.54:9 aspect ratio and 1.07 billion colors delivering stunning visuals. That’s because X Series support both ignition-triggered and G-sensor-based Parking Mode. HONOR Magic 5 Pro 5G comes with a 6.81-inch OLED display. You do not need to purchase specific cables or adapters to make the X Series models work with past batteries. Blackvue Power Magic Pro Hardwire Kit Hardwire kit with voltage cutoff and timer settings to protect battery Constant power supply to allow parked recording. The Power Magic Battery Pack (B-112) and Power Magic Ultra Battery (B-124X) are both compatible with the X Series. In addition, you can set a timer so that your dashcam will turn off based on either voltage or timer cutoff, whichever comes first. The voltage cutoff values are 11.8V, 12V, and 12.5V. With the BlackVue App, you can choose a voltage cutoff value so that your dashcam will shut itself down to prevent draining your battery. When you hardwire your dashcam using the hardwiring power cable, your BlackVue constantly monitors the voltage coming from your vehicle. The built-in voltage monitor lets you hardwire your dashcam and protect your vehicle’s battery without the need for a Power Magic Pro kit. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |